Independent AEG dishwasher repair support in Brighton for integrated, built-in and freestanding appliances. Use the fault library, model/PNC repair brief and local map before booking an engineer visit.
AEG, Electrolux and Zanussi are related Electrolux Group brands. Exact model and product identification still matters because fault codes, electronics and components can differ by appliance.
The original page is centred on Brighton and surrounding locations. This rebuild keeps that local focus while making the route and map easier to use.
Brighton (BN1, BN2, BN3, BN41, BN42), Hove, Lewes, Peacehaven, Shoreham-by-Sea, Portslade, Rottingdean, Newhaven, Southwick
Map: Brighton, UK
Use the exact model, PNC/Product No., error code and symptom. The result gives a diagnostic route and safe first checks without pretending to confirm a failed component remotely.
Search by what the appliance is doing. These are possible diagnostic areas and safe observations, not a remote confirmation of the failed part.
Possible fault areas: Mains supply, door-lock circuit, wiring, user interface or control electronics.
Safe first checks: Check the socket safely and confirm the door closes normally. Do not remove covers.
Possible fault areas: Door latch/interlock, programme selection, control lock, user interface or main control.
Safe first checks: Check the door, selected programme and any control lock.
Possible fault areas: Door catch, hinges, alignment, interlock or integrated furniture-door adjustment.
Safe first checks: Check for obstructions around the door and do not force the latch.
Possible fault areas: Water supply, inlet hose/filter, inlet valve, anti-flood system or control.
Safe first checks: Confirm the water supply is on and the visible inlet hose is not kinked.
Possible fault areas: Restricted supply, inlet filter, hose restriction or inlet valve.
Safe first checks: Check the tap is fully open and the hose is not crushed.
Possible fault areas: Level sensing, inlet valve or control fault.
Safe first checks: Stop using if the water level becomes abnormal or leakage starts.
Possible fault areas: Circulation pump, wash motor, blocked hydraulic path, control or wiring.
Safe first checks: Note whether you can hear the circulation pump after filling.
Possible fault areas: Loading, spray arms, filters, circulation, detergent, heating or water-temperature issue.
Safe first checks: Clean user-accessible filters and spray arms and check loading against the manual.
Possible fault areas: Upper spray arm, feed tube, loading obstruction, circulation pressure or blockage.
Safe first checks: Check the upper spray arm can rotate freely and is not obstructed.
Possible fault areas: Blockage, circulation pressure, pump, loading obstruction or damaged spray arm.
Safe first checks: Remove visible debris from user-accessible spray-arm holes if the manual allows.
Possible fault areas: Filter/sump blockage, drain pump, impeller obstruction, drain hose or control.
Safe first checks: Clean the user-accessible filter and check the visible drain hose for kinks.
Possible fault areas: Drain restriction, pump, anti-flood condition, leak or level sensing.
Safe first checks: Stop if there is visible leakage; note whether the drain pump keeps running.
Possible fault areas: Anti-flood condition, water in base, pressure/level sensing or control.
Safe first checks: Stop if leakage is suspected. Do not tip or dismantle the appliance.
Possible fault areas: Door seal, lower seal, spray pattern, loading, overfill or alignment.
Safe first checks: Inspect the visible seal and make sure nothing prevents the door closing.
Possible fault areas: Pump/sump assembly, internal hose, inlet system, seal or base tray.
Safe first checks: Stop if water is near electrics and note where the leak first appears.
Possible fault areas: Heater earth leakage, pump/motor, wiring, moisture ingress or another electrical fault.
Safe first checks: Stop using and do not repeatedly reset the electrical supply.
Possible fault areas: Heater, temperature sensor, pressure/flow sensing, relay/control or wiring.
Safe first checks: Note whether the cycle completes and whether dishes remain cold.
Possible fault areas: Heating, fan/airflow where fitted, rinse aid, programme, sensor or door-opening function.
Safe first checks: Check rinse aid and programme selection and note whether the appliance heats.
Possible fault areas: Dispenser, spray pattern, water temperature, loading, circulation or programme issue.
Safe first checks: Check that tall items are not blocking the dispenser and spray arms.
Possible fault areas: Dispenser mechanism, obstruction, wiring or control.
Safe first checks: Check that crockery is not physically blocking the dispenser lid.
Possible fault areas: Rinse-aid level/sensor, cap, dosing system or control/display issue.
Safe first checks: Refill as instructed and check the cap is seated correctly.
Possible fault areas: Salt level/sensor, cap, regeneration setting or control/display issue.
Safe first checks: Check dishwasher salt and water-hardness setting in the manual.
Possible fault areas: Salt/rinse-aid dosing, water hardness, detergent or softener setting.
Safe first checks: Check salt cap, rinse-aid dose and local water-hardness setting.
Possible fault areas: Water hardness, detergent/rinse-aid balance, temperature or glass corrosion.
Safe first checks: Review detergent/rinse-aid settings and use a glass-suitable programme.
Possible fault areas: Filter residue, standing water, drain restriction, seals or low-temperature use.
Safe first checks: Clean user-accessible filters and run the manufacturer cleaning programme if advised.
Possible fault areas: Foreign object, pump, circulation motor, spray-arm contact, bearings or loading.
Safe first checks: Check spray arms are not striking dishes and stop for severe grinding.
Possible fault areas: Pump/circulation motor, debris, spray-arm contact or another rotating component.
Safe first checks: Stop if the noise is severe or metallic.
Possible fault areas: Model-specific warning, door, water supply, drain, heating, sensor or control issue.
Safe first checks: Record the beep pattern and any display message.
Possible fault areas: Model-specific sensor, pump, heater, valve, anti-flood, door or control fault.
Safe first checks: Photograph the exact code and rating plate; code meanings can vary by model.
Possible fault areas: Fill, heating, drainage, circulation, door sensing, power or control issue.
Safe first checks: Record the exact stage and any code or lights.
Possible fault areas: Heating, fill/drain restriction, sensor, water temperature or programme logic.
Safe first checks: Note whether it pauses at the same stage every time.
Possible fault areas: Control lock, user interface, power issue, wiring or main control.
Safe first checks: Check the control lock and normal reset procedure in the manual.
Possible fault areas: User interface, moisture, connection or control electronics.
Safe first checks: Record which controls fail and whether the fault changes after drying/cooling.
Possible fault areas: Supply pressure, tap, inlet hose/filter, inlet valve or anti-flood inlet system.
Safe first checks: Check the supply is on and the visible hose is not kinked.
Possible fault areas: Leak into base, float switch, inlet safety system, hose or internal water path.
Safe first checks: Stop using if leakage is suspected and arrange inspection.
Possible fault areas: Furniture door adjustment, hinges, latch alignment or installation.
Safe first checks: Do not force the door; note whether the cabinet front is rubbing or dropping.
Search the wider route network by postcode prefix or town. White-goods coverage deliberately excludes Cornwall, Devon and Dorset. Final availability is confirmed by full postcode, appliance and job type.
Additional services can be discussed where relevant to the job and service route.
Engineer visits are scheduled Monday to Thursday. Concentrating our field routes into four organised service days helps us plan travel efficiently and offer clear appointment windows, while maintaining the dependable service expected from a family business established in 1984.
Visit windows: Morning 8:00–10:30 · Extended Morning 8:00–13:30 · Afternoon 12:00–16:00 · All Day 8:00–16:00. Subject to route and booking availability.
