Do you repair AEG washing machines in Brighton?
Yes, subject to the exact model, fault, access, route and parts availability.
Independent repairs for AEG washing machines and washer dryers in Brighton, including integrated and freestanding appliances. We also use the related Electrolux Group brand family — Electrolux and Zanussi — where relevant to the appliance being assessed.
For a more accurate repair brief, have the full model number, PNC/Prod.No. where shown, exact error code and a rating-plate photo ready.
AEG, Electrolux and Zanussi sit within the Electrolux Group brand family. Exact model and product identification still matters because electronics, components and fault-code meanings can differ between models.
Search by what the appliance is doing. The page gives possible fault areas and safe observations, not a remote confirmation of a failed component.
Possible fault areas: Mains supply, internal fuse/protection, door-lock circuit, wiring or control module.
Safe first checks: Check the socket safely and confirm the door closes fully. Do not remove covers.
Possible fault areas: Door interlock, start control, programme selection, control lock or electronic control.
Safe first checks: Check the door, selected programme and any child/control lock.
Possible fault areas: Door catch, interlock, alignment, wiring or control input.
Safe first checks: Check for trapped laundry and visible damage; do not force the door.
Possible fault areas: Water remaining in the drum, drain fault, interlock or control logic.
Safe first checks: Check whether water remains in the machine. Allow the normal safety delay after a programme.
Possible fault areas: Water supply, inlet hose/filter, inlet valve, pressure system, interlock or control.
Safe first checks: Confirm the water supply is on and the visible fill hose is not kinked.
Possible fault areas: Low flow, inlet filter restriction, hose restriction, valve or supply issue.
Safe first checks: Check the tap is fully open and the hose is not crushed.
Possible fault areas: Pressure/level sensing, inlet valve or control fault.
Safe first checks: Stop using if water level becomes abnormal or leakage starts.
Possible fault areas: User-accessible filter, drain pump, impeller obstruction, drain hose or control fault.
Safe first checks: Clean the pump filter only if the manual identifies it as user accessible; check the drain hose for kinks.
Possible fault areas: Drain restriction, pump, pressure sensing or control issue.
Safe first checks: Confirm whether the pump can be heard and whether the filter is blocked.
Possible fault areas: Drainage fault, load imbalance, motor/drive, speed feedback or control.
Safe first checks: Make sure the machine drains first; try a smaller balanced load.
Possible fault areas: Load balance, motor/drive, speed sensor, suspension or control.
Safe first checks: Try a balanced load and note whether spin speed varies between programmes.
Possible fault areas: Motor, belt where fitted, drive system, control, door lock or seized component.
Safe first checks: Stop if there is a burning smell; note whether the motor can be heard.
Possible fault areas: Heating, drainage, fill, motor, sensor, power or control issue.
Safe first checks: Record the exact stage where it stops and any displayed code.
Possible fault areas: Fill/drain restriction, heating issue, load sensing, imbalance or control logic.
Safe first checks: Check water supply and drainage; note whether it pauses at the same stage.
Possible fault areas: Heater earth leakage, motor, pump, wiring, moisture ingress or another electrical fault.
Safe first checks: Stop using the machine and do not repeatedly reset the electrical supply.
Possible fault areas: Door seal damage, trapped item, excess foam, alignment or overfill.
Safe first checks: Inspect the visible seal and remove trapped objects only when safe.
Possible fault areas: Pump/sump hose, inlet connection, internal hose, dispenser path or seal.
Safe first checks: Stop if water is near electrics; note exactly where water first appears.
Possible fault areas: Bearings, suspension, loose weight/component, motor or foreign object.
Safe first checks: Stop if the drum is scraping or movement becomes severe.
Possible fault areas: Load imbalance, levelling, suspension/shocks or installation issue.
Safe first checks: Check the appliance is level and try a balanced load.
Possible fault areas: Foreign object, bearing, drum support, pump or motor/drive issue.
Safe first checks: Stop for severe metal-on-metal noise.
Possible fault areas: Heating element, temperature sensor, pressure system, relay/control or wiring.
Safe first checks: Note whether the fault happens on all heated programmes.
Possible fault areas: Temperature sensing, heater relay/control or programme selection.
Safe first checks: Stop if overheating is severe and record the programme used.
Possible fault areas: Dispenser blockage, low fill pressure, inlet path or programme issue.
Safe first checks: Clean the dispenser drawer and check water flow.
Possible fault areas: Siphon insert/dispenser blockage, low fill pressure or inlet routing.
Safe first checks: Clean and refit the conditioner siphon/insert if the manual allows.
Possible fault areas: Model-specific sensor, pump, heater, motor, interlock or electronic control fault.
Safe first checks: Photograph the exact code and rating plate. AEG/Electrolux/Zanussi code meanings can depend on model.
Possible fault areas: Control lock, user-interface, power issue, wiring or main control.
Safe first checks: Check the control lock and normal reset procedure in the manual.
Possible fault areas: Excess detergent, unsuitable detergent, soft water or dosing issue.
Safe first checks: Use the correct detergent and dose for water hardness and load.
Possible fault areas: Loading, detergent, low temperature, water flow, heater, drum action or programme choice.
Safe first checks: Check detergent, load size and programme; note whether water heats normally.
Possible fault areas: Residue, standing water, low-temperature use, filter/dispenser contamination or drain issue.
Safe first checks: Clean user-accessible filters/dispenser and run the manufacturer cleaning cycle if advised.
Possible fault areas: Airflow/fan, heating system, sensor, condenser path, water supply or control.
Safe first checks: Check the selected drying programme and load size; note whether the machine warms.
The original AEG area pages cover washing machines and washer dryers, including integrated and freestanding installations. This rebuild keeps that repair focus while making the fault information easier to use.
Engineer visits are route-planned Monday to Thursday. The towns below are established service-route areas; full postcode, appliance type and booking availability are confirmed before the visit.
Map: Brighton, UK
Clear model, fault and local-service information helps customers understand the likely next step before they book, without exaggerated claims.
Yes, subject to the exact model, fault, access, route and parts availability.
Brand, model number, PNC/Prod.No. if shown, exact error code, rating-plate photo, full postcode and what happens during the cycle.
Integrated and freestanding washing machines and washer dryers can be assessed, subject to access and model details.
They are related Electrolux Group brands and can be assessed subject to exact model, fault and parts availability.
Engineer visits are scheduled Monday to Thursday, subject to route and booking availability.
No. It can narrow likely areas and improve the repair brief; internal testing is needed to confirm component failure.
Additional domestic-appliance and food-waste-disposal help is available where relevant.
Engineer visits are scheduled Monday to Thursday. Concentrating our field routes into four organised service days helps us plan travel efficiently and offer clear appointment windows, while maintaining the dependable service expected from a family business established in 1984.
Visit windows: Morning 8:00–10:30 · Extended Morning 8:00–13:30 · Afternoon 12:00–16:00 · All Day 8:00–16:00. Subject to route and booking availability.