Bromley · BR postcodes

Bosch Tumble Dryer Repairs Bromley

A Brassett Ltd provides Bosch tumble dryer repair support across Bromley and nearby BR areas including Bickley, Shortlands, Hayes, Keston, Beckenham, West Wickham, Orpington, Petts Wood and Chislehurst. We deal with heat-pump, condenser, vented, integrated and freestanding dryers and use the Bosch E-Nr, FD number and exact fault symptoms to create a clearer repair brief before the visit.

Appliance engineer working on a tumble dryer
About A Brassett Ltd

Family-run domestic appliance repairs since 1984

A Brassett Ltd has been helping households and property customers with domestic appliance faults for more than four decades. We work with homeowners, landlords, letting agents and property managers, with experience across freestanding and integrated kitchen and laundry appliances.

For a Bosch tumble dryer enquiry we record the dryer type, complete E-Nr and FD number, exact fault or display code, full postcode and any useful photos. This gives the office and engineer a more useful repair brief before travelling.

What customers can expect

Established 1984Long-standing family-run appliance repair business.
Dryer experienceHeat-pump, condenser, vented, integrated and freestanding models.
Clear booking informationModel, fault, postcode and access details recorded before the visit.
Established Bromley coverageBR districts and surrounding South East London routes.
Independent service: A Brassett Ltd is an independent repair company and does not claim Bosch manufacturer authorisation.
Bosch tumble dryer guidance

Common Bosch Tumble Dryer Faults in Bromley

Use these guides to describe the fault before booking. Heat-pump, condenser and vented dryers can fail in different ways, so the complete Bosch E-Nr and FD number are useful with any displayed code or warning.

No heat

Heating system, heat-pump operation, airflow, temperature sensing or control may be involved.

For us: send the complete Bosch E-Nr, FD number, exact symptom/code and full postcode.

Taking too long to dry

Restricted airflow, filter condition, condenser/heat-exchanger condition, loading, sensing or heating performance can extend drying time.

For us: send the complete Bosch E-Nr, FD number, exact symptom/code and full postcode.

Drum not turning

Drive belt, motor, drum support, obstruction or electronic control may be involved.

For us: send the complete Bosch E-Nr, FD number, exact symptom/code and full postcode.

Stops during cycle

Overheating protection, airflow restriction, moisture sensing, motor or control faults may interrupt the programme.

For us: send the complete Bosch E-Nr, FD number, exact symptom/code and full postcode.

Will not start

Check the supply, door closure, programme state and control lock before internal diagnosis.

For us: send the complete Bosch E-Nr, FD number, exact symptom/code and full postcode.

No power / display blank

If the external supply is confirmed, mains components, wiring, user interface or main control may require testing.

For us: send the complete Bosch E-Nr, FD number, exact symptom/code and full postcode.

Trips electrics

Stop using the dryer if it repeatedly trips the supply. Heater, motor, wiring, moisture ingress or another insulation fault needs safe testing.

For us: send the complete Bosch E-Nr, FD number, exact symptom/code and full postcode.

Very noisy

Drum rollers/supports, motor, fan, belt, foreign objects or cabinet vibration can create abnormal noise.

For us: send the complete Bosch E-Nr, FD number, exact symptom/code and full postcode.

Squeaking noise

Drum support, bearings, rollers or belt-related parts may be involved depending on the model.

For us: send the complete Bosch E-Nr, FD number, exact symptom/code and full postcode.

Rumbling noise

Drum support, motor or fan components can create a low rumble that changes with drum speed.

For us: send the complete Bosch E-Nr, FD number, exact symptom/code and full postcode.

Burning smell

Stop using the dryer until checked. Lint build-up, belt friction, motor/electrical faults or overheating may be involved.

For us: send the complete Bosch E-Nr, FD number, exact symptom/code and full postcode.

Heat-pump dryer not drying

Filters, heat exchanger, airflow, compressor/heat-pump performance, sensors or control may be involved.

For us: send the complete Bosch E-Nr, FD number, exact symptom/code and full postcode.

Condenser dryer not drying

Airflow, condenser cleanliness, heater performance and moisture sensing are common diagnostic areas.

For us: send the complete Bosch E-Nr, FD number, exact symptom/code and full postcode.

Water container light on

Check the container is correctly fitted and emptied. Pump, float, hose or sensing faults may otherwise be involved.

For us: send the complete Bosch E-Nr, FD number, exact symptom/code and full postcode.

Water container not filling

Condensate may be diverted to a drain on some installations; otherwise pump, hose or collection issues may need checking.

For us: send the complete Bosch E-Nr, FD number, exact symptom/code and full postcode.

Leaking water

Condensate hoses, pump, seals, heat-exchanger area or incorrect installation can cause water leakage.

For us: send the complete Bosch E-Nr, FD number, exact symptom/code and full postcode.

Filter warning stays on

Clean the accessible lint filters as instructed for the model. Airflow sensing or internal restriction may otherwise be involved.

For us: send the complete Bosch E-Nr, FD number, exact symptom/code and full postcode.

Dryer gets too hot

Restricted airflow, sensor faults, fan problems or control issues can cause excessive heat.

For us: send the complete Bosch E-Nr, FD number, exact symptom/code and full postcode.

Clothes still damp

Programme choice, load size, moisture sensing, airflow and heating performance all affect final dryness.

For us: send the complete Bosch E-Nr, FD number, exact symptom/code and full postcode.

Cycle ends too quickly

Moisture sensing, load type, programme choice or sensor contact can cause premature programme completion.

For us: send the complete Bosch E-Nr, FD number, exact symptom/code and full postcode.

Cycle runs too long

Airflow restriction, low heating performance, heat-pump operation or sensing can extend programme time.

For us: send the complete Bosch E-Nr, FD number, exact symptom/code and full postcode.

Door will not close

Check laundry obstruction first, then latch, hinge or alignment.

For us: send the complete Bosch E-Nr, FD number, exact symptom/code and full postcode.

Door will not open

Programme state, latch mechanism or control may be involved depending on the model.

For us: send the complete Bosch E-Nr, FD number, exact symptom/code and full postcode.

Interior light not working

Lamp/LED module, door sensing, wiring or control may be involved.

For us: send the complete Bosch E-Nr, FD number, exact symptom/code and full postcode.

Buttons not responding

Check control lock and model-specific reset instructions before electronic diagnosis.

For us: send the complete Bosch E-Nr, FD number, exact symptom/code and full postcode.

Error code or symbol

Photograph the exact display and send the complete Bosch E-Nr and FD number because meanings can be model-specific.

For us: send the complete Bosch E-Nr, FD number, exact symptom/code and full postcode.

E90 / E:90 shown

Record the exact display and full E-Nr/FD. Electronic/control-related interpretation can vary by platform.

For us: send the complete Bosch E-Nr, FD number, exact symptom/code and full postcode.

Heat exchanger warning

Clean only the user-accessible components specified for the model. Persistent warnings may require airflow or sensor diagnosis.

For us: send the complete Bosch E-Nr, FD number, exact symptom/code and full postcode.

Lint building up excessively

Filter condition, seals, airflow path or fabric/load characteristics can contribute.

For us: send the complete Bosch E-Nr, FD number, exact symptom/code and full postcode.

Dryer vibrates

Levelling, floor condition, load distribution, drum support or internal components may be involved.

For us: send the complete Bosch E-Nr, FD number, exact symptom/code and full postcode.

Dryer types

Bosch Tumble Dryers We Can Assess

Heat-pump dryersLow-temperature drying systems with heat-pump, airflow and sensor components.
Condenser dryersCondensate collection, pump, heater, airflow and moisture-sensing faults.
Vented dryersHeating, airflow, fan, belt, motor and control faults.
Integrated & freestandingBoth fitted and stand-alone Bosch tumble dryer installations.
Local coverage

Bromley Tumble Dryer Areas, Roads & Postcodes

Choose an area, road or postcode below. The page updates the map and jumps straight to the selected location.

72local road shortcuts

Bromley Tumble Dryer Area Finder

30 Bromley & nearby areas

Tap an area to move directly to its map location.

BR and nearby postcode districts

Useful Bromley, Bromley and nearby Sussex postcode shortcuts.

72 Bromley road shortcuts

These road names make the local page more useful than a generic town page. Tap any road to see it on the map.

Bromley tumble dryer repair coverageBromley, England, United Kingdom
Open Map
Engineer visit windows

Morning 8:00–10:30 · Extended Morning 8:00–1:30 · Afternoon 12:00–4:00 · All Day 8:00–4:00.

The visit window is the engineer's arrival window rather than the expected length of the repair. Availability depends on the route and postcode when the booking is made.

Before You Book a Bosch Tumble Dryer Repair

Locate the Bosch rating label and send the complete E-Nr and FD number where available. Also tell us whether the machine is heat-pump, condenser, vented, integrated or freestanding, and describe exactly when the fault occurs.

Useful booking details

Dryer type · E-Nr · FD number · error code or symptom · full postcode · when the fault occurs · parking/access notes · photos where useful.

Safety: stop using the dryer if it is repeatedly tripping the electrical supply, producing smoke, a strong burning smell or abnormal overheating.