Bosch Tumble Dryer Repairs Tunbridge Wells

A Brassett Ltd provides Bosch tumble dryer repair support across Tunbridge Wells and nearby areas including Southborough, High Brooms, Rusthall, Langton Green, Pembury, Speldhurst and Groombridge. We handle heat-pump, condenser, vented, built-in, integrated and freestanding tumble dryer enquiries and use the E-Nr, FD number and exact fault symptoms to create a clearer repair brief before the visit.

Call 0800 0374915 Book Online Find My Area

Appliance engineer repairing a tumble dryer in a modern kitchen

Family-run Since 1984 Cooking Fault Guide Areas, Roads & Postcodes 10 FAQs

About A Brassett Ltd

Family-run appliance repair specialists since 1984

A Brassett Ltd is a long-established family business providing domestic appliance repairs for homeowners, landlords, letting agents and property managers.

For tumble dryer enquiries we work with heat-pump, condenser, vented, built-in, integrated and freestanding appliances. When booking, it helps to have the E-Nr, FD number if available, exact fault or error code and full postcode available.

What customers can expect

Established 1984Family-run domestic appliance repair business.

Dryer experienceHeat-pump, condenser, vented, integrated and freestanding tumble dryers.

Useful fault informationModel details and fault symptoms help us prepare a clearer repair brief.

Tunbridge Wells coverageTN and nearby Kent/East Sussex districts are covered on this page.

Independent service: A Brassett Ltd is an independent repair company and does not claim Bosch manufacturer authorisation.

Bosch tumble dryer guidance

Common Bosch Tumble Dryer Faults in Tunbridge Wells

Use these guides to describe the fault before booking. Send the complete E-Nr and FD number if available, together with the exact error code, dryer type and full postcode.

Tumble dryer not heating

If the drum turns but there is little or no heat, possible causes include heating components, thermostats, sensors, airflow restrictions or control faults.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Dryer takes too long

Restricted airflow, blocked filters, condenser/heat-exchanger issues, sensor faults or reduced heating performance can extend drying time.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Drum not turning

A broken belt, motor problem, pulley, bearing or control fault may stop the drum.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Dryer will not start

Check the door is fully closed and the power supply is on. Door interlocks, controls, start switches or internal electrical faults may be involved.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Dryer stops during cycle

Overheating, airflow restriction, sensor faults, motor protection or control issues can cause mid-cycle stopping.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

No power

Check the socket, plug, fused spur and breaker first. Internal wiring, filters, control boards or protection components may then need diagnosis.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Trips electrics

Stop using the dryer if it repeatedly trips the supply. Heating components, motors, wiring or moisture can cause earth leakage.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Dryer noisy

Rumbling, scraping or knocking can come from rollers, bearings, fan assemblies, the motor, drum supports or foreign objects.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Dryer squeaking

A persistent squeak can indicate wear in rollers, bearings, belt components or drum supports.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Dryer rumbling

A deep rumbling noise may point to worn support rollers, bearings or motor/fan components.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Burning smell

Stop the dryer and disconnect it if safe to do so. Lint build-up, overheating, belt friction, motor faults or wiring can create burning smells.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Heat-pump dryer not drying

Blocked filters, exchanger airflow, sensor faults, pump issues, refrigerant-system limitations or control faults can reduce drying performance.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Condenser dryer not drying

Blocked filters, condenser restriction, heater faults, sensor issues or poor airflow may be involved.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Water container warning

Check that the container is correctly fitted and empty. Pump, float, hose or sensor faults can also trigger the warning.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Dryer leaking water

Condensate hoses, pumps, tanks, seals or internal blockages may allow water to escape.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Filter warning remains on

Clean all accessible filters fully. If the warning remains, airflow sensing, duct restriction or control issues may need checking.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Dryer overheating

Stop using the appliance if it becomes excessively hot. Airflow restriction, thermostats, sensors or control faults may be involved.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Clothes still damp

Incorrect programme selection, overloading, blocked airflow, sensor faults or reduced heat can leave clothes damp.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Cycle finishes too quickly

Moisture sensing, load size, programme selection or sensor contact issues can cause premature cycle completion.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Cycle runs too long

Poor airflow, weak heating, high moisture load or sensor/control faults may extend the programme.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Door will not latch

A worn catch, latch, hinge alignment or door switch may prevent correct closure and starting.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Interior light not working

Lamp/LED modules, door switches, wiring or control faults may be involved.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Buttons not responding

Child lock, touch-control faults, damp controls or control-board issues may be responsible.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Display blank

If the dryer has power at the socket, the user interface, wiring or control power supply may need testing.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Error code displayed

Photograph the exact code and send the complete Bosch E-Nr and FD number because code meanings can vary by model.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

E90 displayed

Record the full code and model details. E90-type warnings can relate to electronics or communication faults depending on the model.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Condenser warning

Clean the accessible condenser or heat exchanger as specified for the model. Persistent warnings can indicate airflow or sensing issues.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Lint build-up

Heavy lint accumulation can reduce airflow and raise temperatures. Clean user-accessible filters and do not run the dryer with damaged filters.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Dryer vibrating

Check that the appliance is level and stable. Drum support, rollers, bearings or foreign objects may also contribute.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Heat-pump compressor running but poor drying

If airflow and filters are clean but drying remains poor, the heat-pump system, sensors or controls may need specialist diagnosis.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Dryer gets warm but clothes stay wet

Airflow restriction, moisture-sensing faults, weak heat or poor condensate management can cause this symptom.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Dryer dead after power cut

Check the supply and reset controls where applicable. A control board, protection device or power-supply component may need diagnosis.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Dryer fan noisy

Fan blades, lint build-up, motor wear or housing contact can create rattling or scraping.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Drum turns intermittently

Motor protection, belt/pulley wear, control faults or mechanical drag may cause intermittent drum movement.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Dryer smells musty

Moisture left in the appliance, blocked condensate paths or lint accumulation can cause odours.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Dryer smells hot

A strong hot smell can indicate restricted airflow or overheating. Stop the appliance if the smell is unusual or worsening.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Programmes not selecting

Selector controls, touch panels or the main control board may be involved.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Start/pause button intermittent

A worn switch, control panel fault or control-board issue can cause intermittent starting.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Dryer door opens during cycle

Check latch and hinge condition. A damaged catch or alignment issue can prevent secure closure.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Dryer not collecting water

On condenser/heat-pump models, pump, hose, tank, float or internal drainage faults may be involved.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Heat-pump dryer icing or very cold

Ambient temperature, airflow, sensors or heat-pump system faults can affect performance.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Dryer works only on one programme

Control selection, sensor input or board faults may limit programme operation.

For us: send the complete Bosch E-Nr, FD number if available, dryer type, exact symptom/code and full postcode.

Tumble dryer types

Bosch Tumble Dryers We Can Assess

Heat-pump tumble dryersDrying, airflow, sensor, pump, fan, control and performance faults.

Condenser tumble dryersHeating, condenser, water-container, pump, airflow and control faults.

Vented tumble dryersHeating, drum, belt, motor, fan, airflow and electrical faults.

Integrated & built-in dryersFitted appliances where access and surrounding cabinetry may affect removal.

Freestanding tumble dryersStandard stand-alone condenser, vented and heat-pump models.

Local coverage

Tunbridge Wells Cooker Repair Areas, Roads & Postcodes

Choose an area, road or postcode below. The page updates the map and jumps straight to the selected location.

72local road shortcuts

Tunbridge Wells Address Finder

Road, town or area

Postcode district

30 Tunbridge Wells & nearby areas

Tap an area to move directly to its map location.

BN postcode districts

Useful Tunbridge Wells, Tunbridge Wells and nearby Sussex postcode shortcuts.

72 Tunbridge Wells road shortcuts

These road names make the local page more useful than a generic town page. Tap any road to see it on the map.

Tunbridge Wells cooker and oven repair coverageTunbridge Wells, London, United Kingdom

Engineer visit windows

Morning 8:00–10:30 · Extended Morning 8:00–1:30 · Afternoon 12:00–4:00 · All Day 8:00–4:00.

The visit window is the engineer's arrival window rather than the expected length of the repair. Availability depends on the route and postcode when the booking is made.

Before You Book a Bosch Tumble Dryer Repair

The Bosch E-Nr is normally on the appliance rating plate, often around the door opening or inside the door area depending on the model. Copy the complete E-Nr including the /xx suffix where present.

Useful booking details

Dryer type · E-Nr · FD number if available · exact fault/error code · full postcode · when the fault occurs · photos where useful.

Safety: Stop using the appliance if it repeatedly trips the electrics, smells of burning or becomes excessively hot.

Frequently asked questions

Tunbridge Wells Bosch Tumble Dryer FAQs

Useful answers about dryer types, booking information, safety and local coverage.

Do you repair Bosch heat-pump tumble dryers in Tunbridge Wells?

Yes. Heat-pump tumble dryer enquiries are accepted, subject to the appliance and fault.

Do you repair condenser tumble dryers?

Yes. We handle condenser dryer faults including poor drying, water-container warnings, leaks and airflow issues.

Do you repair vented tumble dryers?

Yes. Vented dryer enquiries can include heating, drum, fan, belt, motor and control faults.

Do you repair built-in or integrated tumble dryers?

Yes. Built-in, integrated and freestanding tumble dryer enquiries are accepted, subject to access and the fault.

What information should I send before booking?

Please send the dryer type, complete Bosch E-Nr, FD number if available, exact fault or error code, full postcode and photos where useful.

Which Tunbridge Wells areas do you cover?

The page includes Tunbridge Wells, Southborough, High Brooms, Rusthall, Langton Green, Pembury, Speldhurst, Groombridge and nearby Kent and East Sussex areas.

What visit windows do you offer?

Our visit windows are Morning 8:00–10:30, Extended Morning 8:00–1:30, Afternoon 12:00–4:00 and All Day 8:00–4:00, subject to route and postcode availability.

Can you help if the dryer is not heating?

Yes. No-heat faults can involve heating components, thermostats, sensors, airflow or controls depending on the dryer type.

Can you help if the dryer keeps tripping the electrics?

Yes. Stop using the appliance if it repeatedly trips the supply and tell us exactly when it happens.

Do you repair dryers that are noisy or not turning?

Yes. Drum, belt, roller, bearing, fan and motor-related faults can be assessed.