Independent care for your home
Bosch WNG25401GB: the washer display goes blank mid-cycle.
Bosch WNG25401GB enquiry about the washer display goes blank mid-cycle: observations to record, the appliance format and safe preparation for independent assessment.

What should I record?
The washer display goes blank mid-cycle
Record the programme stage and any other equipment affected by the interruption. A blank display does not by itself identify a control-board failure. Leave covers closed and do not repeatedly reset electrical protection.
Your WNG25401GB reference
10.5 kg wash / 6 kg dry washer dryer, 1400 rpm. Say whether washing, drying or both functions are affected, and describe the load and selected cycle. Include the complete E-Nr with its slash suffix, the FD number, the exact display message and your postcode.
Before an assessment
Keep the observation separate from a diagnosis
This guide helps describe an enquiry; it does not mean that WNG25401GB has a known defect or that a particular part has failed. This model reference helps identify the appliance. The complete rating plate is needed to check the variant, suitable work and parts; inclusion here does not confirm repairability or safety-action status.
Identify it safely
Copy the complete E-Nr including its slash suffix, the FD production reference and any serial number from an accessible label or existing handbook. Photograph the complete accessible rating plate and identify a washing machine or combined washer-dryer. Keep the model, serial and every product or service number together.
When the rating plate is difficult to reach
Start with the handbook, purchase papers or an earlier label photograph. Tell the team what is still missing. A complete exterior description is preferable to moving a heavy fitted appliance just to find a hidden number.
Other details that can help
The washer display goes blank mid-cycle
Record the programme stage and any other equipment affected by the interruption. A blank display does not by itself identify a control-board failure. Leave covers closed and do not repeatedly reset electrical protection.
The washer door remains locked with laundry inside
Say whether the display shows an end, a pause or a warning and whether water is visible. Do not force the handle or use a release procedure for another model. The actual condition and instructions determine the next step.
Detergent remains in the drawer after use
Name the compartment, product and programme used. Describe what remained without adding improvised cleaners or dismantling hidden dispenser parts. The result and any change in filling should be recorded separately.
The machine finishes with detergent residue on the load
Describe the load, programme and visible residue from the last completed cycle. Keep that observation distinct from powder left in the dispenser. Use the exact model’s routine-use guidance and avoid increasing detergent in an attempt to conceal the result.
Related model information
Prepare your enquiry
Keep your details together
This notepad stays in your browser. Copy it into the booking form when ready.
Watch our appliance guide
A Brassett • spoken guide
Washing machine not draining?
A short A Brassett washing-machine advert about draining, spinning and water left inside, with London and Home Counties contact information. Spoken introduction with English captions.
Use the player controls for sound and captions. This introduction is promotional; describe your own appliance and fault when contacting us.
Read the transcript
Washing machine not draining or spinning? A Brassett Limited can help with your repair enquiry. Tell us the model, what happens during the cycle, and your full postcode. For independent appliance care, book online with A Brassett today.
Useful links
Discuss your appliance with us
Engineer visit windows
Monday to Thursday, subject to confirmation.
- Morning8:00–10:30
- Afternoon12:00–4:00
- All day8:00–4:00
- Extended morning8:00–1:30
Send your full postcode, model, serial, error code if shown and a safe exterior photograph when enquiring.