Independent care. Family-run since 1984.Engineer visits Monday–Thursday

Independent care for your home

Bosch WNG25401GB: water is visible after the wash ends.

Bosch WNG25401GB enquiry about water is visible after the wash ends: observations to record, the appliance format and safe preparation for independent assessment.

Family-run since 1984Independent appliance care
Illustrative A Brassett engineer wearing a teal workjacket with clear company branding
A Brassett Ltd · Promotional illustration

What should I record?

Water is visible after the wash ends

Keep the door closed while water is present and mention whether draining could be heard. Do not undo plumbing or reach into inaccessible pump parts. The complete model and programme stage guide the enquiry.

Your WNG25401GB reference

10.5 kg wash / 6 kg dry washer dryer, 1400 rpm. Say whether washing, drying or both functions are affected, and describe the load and selected cycle. Include the complete E-Nr with its slash suffix, the FD number, the exact display message and your postcode.

Before an assessment

Keep the observation separate from a diagnosis

This guide helps describe an enquiry; it does not mean that WNG25401GB has a known defect or that a particular part has failed. This model reference helps identify the appliance. The complete rating plate is needed to check the variant, suitable work and parts; inclusion here does not confirm repairability or safety-action status.

Identify it safely

Copy the complete E-Nr including its slash suffix, the FD production reference and any serial number from an accessible label or existing handbook. Photograph the complete accessible rating plate and identify a washing machine or combined washer-dryer. Keep the model, serial and every product or service number together.

When an error is displayed

Copy every letter, digit and separator, and say when it appears. Similar codes can be used differently across products. Include the product number so the observation can be interpreted against the correct appliance information.

Other details that can help

The washer fills but the programme does not progress

Give the selected programme and the last visible or audible change. Say whether a message appeared or the drum moved. A clear sequence helps separate the complaint from an assumed motor, valve or control fault.

The final spin leaves the load unusually wet

Describe whether the cycle indicated completion, paused or retained visible water. Include the load type from that occasion. Do not run repeated spins on a machine that moves dangerously, leaks or trips.

The washer display goes blank mid-cycle

Record the programme stage and any other equipment affected by the interruption. A blank display does not by itself identify a control-board failure. Leave covers closed and do not repeatedly reset electrical protection.

Detergent remains in the drawer after use

Name the compartment, product and programme used. Describe what remained without adding improvised cleaners or dismantling hidden dispenser parts. The result and any change in filling should be recorded separately.

Related model information

Prepare your enquiry

Keep your details together

This notepad stays in your browser. Copy it into the booking form when ready.

Watch our appliance guide

A Brassett • spoken guide

Washing machine not draining?

A short A Brassett washing-machine advert about draining, spinning and water left inside, with London and Home Counties contact information. Spoken introduction with English captions.

Use the player controls for sound and captions. This introduction is promotional; describe your own appliance and fault when contacting us.

Read the transcript

Washing machine not draining or spinning? A Brassett Limited can help with your repair enquiry. Tell us the model, what happens during the cycle, and your full postcode. For independent appliance care, book online with A Brassett today.

Useful links

Discuss your appliance with us

Gas cooker repairs are included. We do not repair AGA appliances, American-style or side-by-side refrigeration. Compressor, regassing and refrigerant-circuit work and new installations are excluded. Work and appointments are confirmed individually.

Engineer visit windows

Monday to Thursday, subject to confirmation.

  • Morning8:00–10:30
  • Afternoon12:00–4:00
  • All day8:00–4:00
  • Extended morning8:00–1:30

Send your full postcode, model, serial, error code if shown and a safe exterior photograph when enquiring.