Independent care for your home
Dishwashers repairs.
Dishwasher repair enquiries for Bosch and related appliances. Identify the model, describe the symptom and discuss suitable work with A Brassett.

Start with the appliance in front of you
Suitable enquiries
Existing integrated and freestanding dishwashers. Describe the programme stage, wash result and whether water remains inside. Include the furniture-door arrangement where relevant.
Identify the exact model
Copy the complete E-Nr including its slash suffix, the FD production reference and any serial number from an accessible label or existing handbook. The label is often on the door edge. Photograph it without removing trim, and include the full product reference alongside any warning exactly as displayed.
Describe the change you noticed
The dishwasher stops after its initial drain
Describe what followed the drain: filling, silence, a warning or a display change. Keep the selected programme with the model. An interrupted sequence should not be reduced to a guessed inlet or pump fault.
The upper basket has a poorer wash result
Compare the observed result with the lower basket from that same load. Mention an obvious loading obstruction without removing inaccessible parts. Different results in two baskets do not establish which component requires attention.
Water remains after the dishwasher signals an end
Explain whether the end was normal or accompanied by a warning. Leave hoses and concealed connections alone. The remaining water, programme stage and appliance identity together provide a better starting point than a presumed blocked pump.
The detergent dispenser does not open as expected
Record the programme and whether the dispenser remained shut or opened with product still inside. Do not force its catch. Door furniture and model-specific dispenser arrangements matter when assessing suitable work.
The integrated door falls more heavily than before
Avoid repeatedly demonstrating a door that drops unexpectedly. Describe the furniture panel and any visible change in alignment. Springs, hinges and panel weight need consideration against the fitted appliance model.
The dishwasher finishes with a colder wet load
Name the programme and explain the difference from its usual result. Drying behaviour depends on the product and selection, so moisture alone is not proof of a failed heater. Include any warning separately.
The dishwasher leaks during an ordinary cycle
Stop use and keep clear of water around electrics. Say where water first appeared and how far the cycle had progressed. Leave the machine fitted in place and avoid opening plumbing to investigate.
The dishwasher controls respond only intermittently
Identify the control or display area and any accompanying message. Do not apply liquids to the fascia or open the door electronics. The team needs the full model and a description of the sequence already observed.
The wash sound changes partway through the cycle
Describe whether the new sound occurred during washing, draining or a pause. Do not restart an abnormally noisy appliance for comparison. The stage helps organise an enquiry without assigning a pump diagnosis.
The cycle time remains unchanged for a long period
Record the programme and the displayed time when progress appeared to stop. Say what the appliance was doing then. Time estimates can change, so the observation should include the eventual result or warning.
The upper basket result differs from the lower basket
Describe the result in each basket after the last completed programme. A difference in cleaning is useful information but does not on its own identify a pump or spray-arm defect. Include the model and any displayed message.
The dispenser contains detergent after the cycle
Explain whether a tablet remained intact or residue was left after the last ordinary use. Keep this separate from a programme stopping with water present. The dispenser condition and the cycle sequence need assessment together.
The dishwasher finishes but the load remains unusually wet
Record the programme and the types of items that stayed wet. Drying results and wash quality are separate observations. Avoid assuming a failed heater from droplets on one material; the model and actual sequence matter.
The furniture door catches as the dishwasher opens
Describe the point of contact with the plinth, adjacent door or appliance without forcing it. Mention any recent furniture change. A fitted-door problem may require access information as well as the appliance model.
Model reference guides
Examples for identification, not a parts-stock list or a promise of repairability.
Specific fault guides
Regional appliance guides
Prepare your enquiry
Keep your details together
This notepad stays in your browser. Copy it into the booking form when ready.
Watch our appliance guide
A Brassett • spoken guide
Dishwasher not cleaning?
An A Brassett dishwasher advert introducing poor cleaning, water left inside and a cycle that stops before completion. Spoken introduction with English captions.
Use the player controls for sound and captions. This introduction is promotional; describe your own appliance and fault when contacting us.
Read the transcript
Dishes still dirty, or water left inside? Speak to A Brassett Limited. Keep the dishwasher model and any displayed error code ready when you contact us. We check suitable work and appointments individually. Start your enquiry online.
Useful links
Discuss your appliance with us
Engineer visit windows
Monday to Thursday, subject to confirmation.
- Morning8:00–10:30
- Afternoon12:00–4:00
- All day8:00–4:00
- Extended morning8:00–1:30
Send your full postcode, model, serial, error code if shown and a safe exterior photograph when enquiring.