Independent care. Family-run since 1984.Engineer visits Monday–Thursday

Independent care for your home

Electric & induction hobs repairs.

Electric hob repair enquiries for Bosch and related appliances. Identify the model, describe the symptom and discuss suitable work with A Brassett.

Family-run since 1984Independent appliance care
Illustrative A Brassett engineer wearing a stone workshirt with clear company branding
A Brassett Ltd · Promotional illustration

Start with the appliance in front of you

Suitable enquiries

Belling electric, ceramic and induction hob enquiries, assessed against the actual model.

Identify the exact model

Copy the complete E-Nr including its slash suffix, the FD production reference and any serial number from an accessible label or existing handbook. For a fitted hob, check retained paperwork for the product number. Do not lift the hob, reach beneath live equipment or remove furniture to find a hidden label.

Describe the change you noticed

One ceramic hotplate no longer heats

Identify the zone by its position when facing the cooker. Describe its control response and whether other plates were working during the last ordinary use. Do not touch the surface to check temperature or assume a particular element from the zone's appearance.

The outer part of a dual cooking zone is inactive

Confirm from the correct manual that the zone has a selectable outer section. Record the control selection already used. A marked circle alone does not establish the appliance's switching arrangement or the cause of a changed heating pattern.

A radiant plate heats unevenly

Explain what changed during the last use and which zone was selected. Radiant elements may visibly cycle during normal operation, so describe the cooking effect as well as the glow. Leave internal connections and surface fixings untouched.

The ceramic surface is cracked

Stop using the hob or cooker and avoid moisture around the damaged surface. Provide the model and an exterior photograph only if safe. Do not cover the crack or continue with a different zone as a workaround.

The residual-heat light remains illuminated

Identify the indicator and explain whether the surface was recently used. Do not test heat with your hand. The exact model and sequence matter before deciding whether the indication concerns ordinary cooling or a fault needing assessment.

A hotplate control has become stiff

Do not force the control. Record its labelled position and whether there is visible damage or looseness around it. The knob and the mechanism behind it are different parts, and the correct model is needed before suitable work is discussed.

Several electric zones stop at the same time

List the affected zones and any display, clock or cooker function that also changed. A combined interruption deserves one clear sequence of events. Do not open the appliance or its connection point to compare wiring.

The cooker trips when a hotplate is selected

Leave the appliance out of use and note the selected zone and stage. Do not repeatedly reset protection or use another hotplate to work around the problem. Describe the event already observed so the team can assess a suitable route.

A zone continues heating after its normal selection changes

Stop using the appliance if control of heating appears abnormal. Explain what was selected and what remained active without trying further settings. The enquiry should retain the observation rather than propose an unverified switch or relay replacement.

The glass markings have become difficult to identify

Use the complete model and an overall photograph to establish the original control arrangement. Do not infer a zone's power or function from a worn marking. The correct manual can clarify normal controls before a service fault is considered.

The touch panel does not accept a selection

Record the display and any lock symbol seen during the last attempt. Use only the normal-control instructions for the exact hob model. Do not assume a touch response identifies the condition of the heating circuits, and leave internal electronics untouched.

An induction zone does not recognise a pan

Identify the hob model, zone and display indication, and describe the pan already in use. Do not repeatedly test an appliance after tripping or overheating. Pan recognition applies to induction cooking; a radiant ceramic hotplate operates differently.

The hob shows an unfamiliar letter or number

Copy every character and note whether it appears on one zone or the whole display. The same-looking warning may have different meanings on different models. The helper records it without assigning a guessed fault definition.

The hob fan sound has changed

For a related-brand hob with a fan, describe when the sound starts and stops relative to cooking. Do not remove drawers or covers to reach internal parts. Keep the product identity with the observation because not every electric hob uses the same arrangement.

The hotplate works only at some control positions

Note the marked positions already used and the observed result. Do not keep changing settings to map the fault. The relationship between selector and heat output requires the correct appliance information and an appropriate assessment.

Heat affects nearby trim unexpectedly

Stop use if there is scorching, melting or an unusual smell. Describe the visible location and which cooking function was selected. Leave the appliance and surrounding furniture in place until the requested work and access have been discussed.

The electric zone indication flashes during use

Write down the indication and whether the selected heat or cooking result changed with it. A flashing signal may have a model-specific purpose. Do not choose a code meaning from an unrelated brand simply because the character matches.

The appliance uses gas rather than electricity

This guide focuses on electric and induction hobs. For a gas cooking enquiry, give the full model and fuel arrangement and ask the team to check the requested work. A Brassett accepts gas cooker repairs; the electrical display alone does not identify the cooking fuel.

Model reference guides

Examples for identification, not a parts-stock list or a promise of repairability.

Specific fault guides

Regional appliance guides

Choose a region

Prepare your enquiry

Keep your details together

This notepad stays in your browser. Copy it into the booking form when ready.

Watch our appliance guide

A Brassett • spoken guide

Electric oven not heating?

A Brassett introduction to electric oven repair enquiries: missing heat, selected settings and the model details to provide. Spoken British English with captions.

Use the player controls for sound and captions. This introduction is promotional; describe your own appliance and fault when contacting us.

Read the transcript

Electric oven not heating evenly? A Brassett Limited welcomes your repair enquiry. Describe the setting you selected, the fault you noticed, and your appliance model. For independent electric oven repairs, share your postcode and start your enquiry online.

Useful links

Discuss your appliance with us

Gas cooker repairs are included. We do not repair AGA appliances, American-style or side-by-side refrigeration. Compressor, regassing and refrigerant-circuit work and new installations are excluded. Work and appointments are confirmed individually.

Engineer visit windows

Monday to Thursday, subject to confirmation.

  • Morning8:00–10:30
  • Afternoon12:00–4:00
  • All day8:00–4:00
  • Extended morning8:00–1:30

Send your full postcode, model, serial, error code if shown and a safe exterior photograph when enquiring.