Independent care. Family-run since 1984.Engineer visits Monday–Thursday

Independent care for your home

Bosch SMI2HTS06G: the dishwasher finishes with a colder wet load.

Bosch SMI2HTS06G enquiry about the dishwasher finishes with a colder wet load: observations to record, the appliance format and safe preparation for independent assessment.

Family-run since 1984Independent appliance care
Illustrative A Brassett engineer wearing a stone workshirt with clear company branding
A Brassett Ltd · Promotional illustration

What should I record?

The dishwasher finishes with a colder wet load

Name the programme and explain the difference from its usual result. Drying behaviour depends on the product and selection, so moisture alone is not proof of a failed heater. Include any warning separately.

Your SMI2HTS06G reference

60 cm semi-integrated dishwasher. Tell us whether the control panel responds and whether the problem begins before or after water enters. Include the complete E-Nr with its slash suffix, the FD number, the exact display message and your postcode.

Before an assessment

Keep the observation separate from a diagnosis

This guide helps describe an enquiry; it does not mean that SMI2HTS06G has a known defect or that a particular part has failed. This model reference helps identify the appliance. The complete rating plate is needed to check the variant, suitable work and parts; inclusion here does not confirm repairability or safety-action status.

Identify it safely

Copy the complete E-Nr including its slash suffix, the FD production reference and any serial number from an accessible label or existing handbook. The label is often on the door edge. Photograph it without removing trim, and include the full product reference alongside any warning exactly as displayed.

When the appliance is behind a furniture door

Describe whether the decorative door still opens normally and any contact with nearby cabinets. Do not remove hinges or plinths before the team has assessed the access. Include a photograph taken from the room if useful.

Other details that can help

The dishwasher leaks during an ordinary cycle

Stop use and keep clear of water around electrics. Say where water first appeared and how far the cycle had progressed. Leave the machine fitted in place and avoid opening plumbing to investigate.

The wash sound changes partway through the cycle

Describe whether the new sound occurred during washing, draining or a pause. Do not restart an abnormally noisy appliance for comparison. The stage helps organise an enquiry without assigning a pump diagnosis.

The upper basket result differs from the lower basket

Describe the result in each basket after the last completed programme. A difference in cleaning is useful information but does not on its own identify a pump or spray-arm defect. Include the model and any displayed message.

The dispenser contains detergent after the cycle

Explain whether a tablet remained intact or residue was left after the last ordinary use. Keep this separate from a programme stopping with water present. The dispenser condition and the cycle sequence need assessment together.

Related model information

Prepare your enquiry

Keep your details together

This notepad stays in your browser. Copy it into the booking form when ready.

Watch our appliance guide

A Brassett • spoken guide

Dishwasher not cleaning?

An A Brassett dishwasher advert introducing poor cleaning, water left inside and a cycle that stops before completion. Spoken introduction with English captions.

Use the player controls for sound and captions. This introduction is promotional; describe your own appliance and fault when contacting us.

Read the transcript

Dishes still dirty, or water left inside? Speak to A Brassett Limited. Keep the dishwasher model and any displayed error code ready when you contact us. We check suitable work and appointments individually. Start your enquiry online.

Useful links

Discuss your appliance with us

Gas cooker repairs are included. We do not repair AGA appliances, American-style or side-by-side refrigeration. Compressor, regassing and refrigerant-circuit work and new installations are excluded. Work and appointments are confirmed individually.

Engineer visit windows

Monday to Thursday, subject to confirmation.

  • Morning8:00–10:30
  • Afternoon12:00–4:00
  • All day8:00–4:00
  • Extended morning8:00–1:30

Send your full postcode, model, serial, error code if shown and a safe exterior photograph when enquiring.